Bandsaw tires are one of the many essential parts of a bandsaw machine. Tires protect the wheels in order to help improve saw performance. They provide adhesion to the metal wheels so that the blade stays on the wheels, moving smoothly and continuously around the saw.
A well-maintained bandsaw machine’s tires will always be in good shape, be soft and pliable, and made of quality materials. If they become hard, brittle if rubber, worn out, or are cracked, then it is time to replace them. If the tires are not replaced, blade drift will occur due to the blade not being properly set on the wheel(s).
The choice of bandsaw tire includes rubber or urethane. Installation of either type can be difficult. Often, it takes a third hand in order to help stretch or clamp them onto the wheel.
Rubber tire sizing can be problematic due to the need to have them stretched, and most rubber tires need to be ordered at least 2” smaller than the wheels. Also, rubber tires require glue for installation along with solvent to remove them and clean the wheels, adding to the cost.
Rubber tires especially are prone to wear and tear.
Urethane tires fit right onto the wheel(s) and require no glue to apply nor solvent to remove old glue. They are more durable than rubber and are abuse-resistant as well. They are also the standard now and come highly recommended due to their ability to offer better grip and straighter cuts while helping to prolong blade life.
Check the tires regularly and replace as needed. They don’t wear out fast, so there is a tendency to ignore them until it is too late.
Great bandsaw machine performance depends on things like compatibility and properly installed parts. Both are great ways to help maintain the bandsaw and keep it running at its best possible performance level.
Be sure to visit our website for all your bandsaw parts needs.